22 March 2022
Blood-compatible membranes are among the most effective and cost-saving tools used to separate blood components. However, polypropylene (PP) membranes currently used in blood-contacting devices are prone to biofouling by host blood cells, proteins, and bacteria. Host contamination is one of the most critical bottleneck factors that limit the usage of PP membranes in clinical microbiology. The development of a filtering membrane resistant to biofouling is essential not only in clinical microbiology but also in blood filtration processes, water treatment, and the food industry.
Biofouling resistance of PP membranes is significantly improved with surface zwitterionization for leukocyte reduction filters. Micronbrane enhanced this technique and developed zwitterionic interface ultra-self-assemble coating technology (global patent) used in Devin filter. The developed membrane can remove more than 95% of nucleated cells from whole blood samples within just 5 minutes. Let’s see how it works.
Why zwitterionic materials?
Compared to other types of materials, zwitterionic networks have higher stability in complex mediums. More importantly, zwitterions provide strong hydration, and the modification process results in better hydration of the membranes. This characteristic acts as an energetic barrier against adsorption and biofouling by proteins, bacteria, and blood cells. Essential advantages of developing the zwitterionic membranes are that the method does not involve irradiation, oxygen plasma treatment, or UV irradiation.
Protein, bacteria, and blood cell biofouling prevention
Protein biofouling observed in commercial membranes promotes the adsorption of bacteria and blood cells. One of the most essential proteins found in blood samples is fibrinogen, a vital plasma protein involved in the formation of clots. Fibrinogen adhesion during filtration processes leads to white blood cell adhesion, deformation, and cellular death. The results obtained from Zwitterionized membranes indicated a drastic decrease in fibrinogen adsorption from 6.4 to 0.9 μg/cm2.
Zwitterionized membranes were tested for resistance to Escherichia coli, a bacterium commonly responsible for medical infections such as urinary tract infections. The bacterial adherence value was set to 100%, and results revealed a decreased E.coli adherence to the lowest relative measured attachment of 3 ± 1%.
How modified PP membranes remove white blood cells from blood samples
Compared to the commercial membranes where the pore size is reduced, the method through which the membranes are developed preserves the large pore size and porosity (Fig.1). These traits are essential for blood filtration processes, red blood cell preservation, and retention of white blood cells.
Fig. 1. The effect of coating poly(GMA-co-SBMA) with/without cross-linking agent (EDA) on (a) the structure, (b) pore size, and (c) porosity of modified PP fibrous membranes.
When a blood sample is filtrated through the Devin filters, white blood cells remain in the retentate or the part that does not pass through the membrane. Not only this, as compared to other types of membranes, the shape of white blood cells remains unaltered, and cells are still viable.
Multiple tests revealed that the modified PP membranes were highly efficient in selectively removing 99.99% of white blood cells from the filtered blood sample without affecting the erythrocyte concentration (Fig. 2).
Fig. 2 Schematic presentation of leukocyte removal from whole blood during blood filtration using modified PP membranes with a cross-linked poly(GMA-co-SBMA) polymer
The permeate, or the part that passes through the membrane, revealed a concentration of 0.07 103 cells/μL after filtration, while the initial concentration was 9.39 103 cells/μL. In comparison, unmodified membranes do not permit blood flow, and the commercially available hydrophilic membranes are not suitable barriers for white blood cells (Fig. 3).
Another advantage of poly(GMA-co-SBMA)-coated membrane is that the red blood cell concentration remains unchanged after filtration. This result indicates that these filters can be used to prepare RBCs-rich blood fractions, essential to patients suffering from intense bleeding after physical trauma.
Fig. 3 Comparison of poly(GMA-co-SBMA)-coated membranes with virgin unmodified PP and 3 or 5 layers of commercial hydrophilic membranes. (a) Whole blood filtration; (b) Concentration of red blood cells and white blood cells in the permeate (dotted lines) and white blood cells removal ratio determined from the white blood cells concentration in whole blood
Overall poly(GMA-co-SBMA)-coated zwitterionic membranes showed a significant improvement in blood compatibility with all analyzed samples. Multiple tests showed that compared to commercial membranes poly(GMA-co-SBMA)-coated zwitterionic membranes proved higher resistance to biofoulants adsorption and ideal cell preservation proprieties. The results and characteristics of the modified zwitterionic membranes indicate that this technology effectively reduces leucocytes in blood samples and removes host contamination from body fluids like whole blood. Micronbrane holds patent for this unique technology and utilizes it in its novel Devin® filter. PaRTI-Seq® built upon Devin® filter can provide precise test results within less than 24 hours upon sample receival.
 M.Y. Jaffrin, C. Legallais, Plasma separation and purification by membrane, in: M. Akay (Ed.), Wiley Encyclopedia of Biomedical Engineering, John Wiley & Sons, Inc., New Your City (USA), 2006ebs 0935.
 R. Hirano, K. Namazuda, J. Suemitsu, T. Harashima, N. Hirata, Plasma separation using a membrane, Transfus. Apher. Sci. 56 (2017) 649–653.
 A. Ohkubo, T. Okado, Selective plasma exchange, Transfus. Apher. Sci. 56 (2017) 657–660.
 K.E. Kinzer, D.R. Lloyd, M.S. Gay, J.P. Wightman, B.C. Johnson, Phase inversionmsulfonated polysulfone membranes, J. Membr. Sci. 22 (1985) 1–29.
 C. Chandavasu, M. Xanthos, K.K. Sirkar, C.G. Gogos, Fabrication of microporous polymeric membranes by melt processing of immiscible blends, J. Membr. Sci. 211
 W. Yave, R. Quijada, D. Serafini, D.R. Lloyd, Effect of the polypropylene type on polymer–diluent phase diagrams and membrane structure in membranes formed via the TIPS process Part II. Syndiotactic and isotactic polypropylenes produced using metallocene catalysts, J. Membr. Sci. 263 (2005) 154–159.
 F. Sadeghi, A. Ajji, P.J. Carreau, Analysis of microporous membranes obtained from polypropylene films by stretching, J. Membr. Sci. 292 (2007) 62–71.
 F. Sadeghi, A. Ajji, P.J. Carreau, Microporous membranes obtained from polypropylene blends with superior permeability properties, J. Polym. Sci., Part B: Polym. Phys. 46 (2008) 148–157.
 F. Sadeghi, A. Ajji, P.J. Carreau, Analysis of row nucleated lamellar morphology of polypropylene obtained from the cast film process: effect of melt rheology and process conditions, Polym. Eng. Sci. 47 (2007) 1170–1178.
 R.D. Bagnall, Adsorption of plasma proteins on hydrophobic surfaces. I. Albumin and γ-globulin, J. Biomed. Mater. Res. 11 (1977) 947–978.
 Y. Ito, M. Sisido, Y. Imanishi, Adsorption of plasma proteins to the derivatives of polyetherurethaneurea carrying tertiary amino groups in the side chains, J. Biomed. Mater. Res. 20 (1986) 1139–1155.
 R.G. Chapman, E. Ostuni, S. Takayama, R.E. Holmlin, L. Yan, G.M. Whitesides, Surveying for surfaces that resist the adsorption of proteins, J. Am. Chem. Soc. 122 (2000) 8303–8304.
 T. Xiang, R. Wang, W.-F. Zhao, S.-D. Sun, C.-S. Zhao, Covalent deposition of zwitterionic polymer and citric acid by click chemistry-enabled layer-by-layer assembly for improving the blood compatibility of polysulfone membrane, Langmuir 30 (2014) 5115–5125.
 T. Xiang, C.-D. Luo, R. Wang, Z.-Y. Han, S.-D. Sun, C.-S. Zhao, Ionic-strength-sensitive polyethersulfone membrane with improved anti-fouling property modified by zwitterionic polymer via in situ cross-linked polymerization, J. Membr. Sci. 476 (2015) 234–242.
 T. Xiang, T. Lu, Y. Xie, W.-F. Zhao, S.-D. Sun, C.-S. Zhao, Zwitterionic polymer functionalization of polysulfone membrane with improved antifouling property and blood compatibility by combination of ATRP and click chemistry, Acta Biomater. 40 (2016) 162–171.
 S. Rajabzadeh, R. Sano, T. Ishigami, Y. Kakihana, Y. Ohmukai, H. Matsuyama, Preparation of hydrophilic vinyl chloride copolymer hollow fiber membranes with antifouling properties, Appl. Surf. Sci. 324 (2015) 718–724.
 Y. Liu, Y. Su, X. Zhao, Y. Li, R. Zhang, Z. Jiang, Improved antifouling properties of polyethersulfone membrane by blending the amphiphilic surface modifier with crosslinked hydrophobic segments, J. Membr. Sci. 486 (2015) 195–206.
 P.-F. Ren, Y. Fang, L.-S. Wan, X.-Y. Ye, Z.-K. Xu, Surface modification of polypropylene microfiltration membrane by grafting poly(sulfobetaine methacrylate) and poly(ethylene glycol); oxidative stability and antifouling capability, J. Membr. Sci. 492 (2015) 249–256.
 J.-K. Pi, H.-C. Yang, L.-S. Wan, J. Wu, Z.-K.g Xu, Polypropylene microfiltration membranes modified with TiO2 nanoparticles for surface wettability and antifouling property, J. Membr. Sci. 500 (2016) 8–15.
 T. Xiang, T. Lu, Y. Xie, W.-F. Zhao, S.-D. Sun, C.-S. Zhao, Zwitterionic polymer functionalization of polysulfone membrane with improved antifouling property and blood compatibility by combination of ATRP and click chemistry, J. Membr. Sci. 40 (2016) 162–171.
 W. Ma, S. Rajabzadeh, A.R. Shaikh, Y. Kakihana, Y. Sun, H. Matsuyama, Effect of type of poly(ethylene glycol) (PEG) based amphiphilic copolymer on antifouling properties of copolymer/poly(vinylidene fluoride) (PVDF) blend membranes, J. Membr. Sci. 514 (2016) 429–439.
 Y.-F. Mi, F.-Y. Zhao, Y.-S. Guo, X.-D. Weng, C.-C. Ye, Q.-F. An, Constructing zwitterionic surface of nanofiltration membrane for high flux and antifouling performance, J. Membr. Sci. 541 (2017) 29–38.
 D.M. Davenport, J. Lee, M. Elimelech, Efficacy of antifouling modification of ultrafiltration membranes by grafting zwitterionic polymer brushes, Separ. Purif. Technol. 189 (2017) 389–398.
 X. Wang, Z. Wang, Z. Wang, Y. Cao, J. Meng, Tethering of hyperbranched polyols using PEI as a building block to synthesize antifouling PVDF membranes, Appl. Surf. Sci. 419 (2017) 546–556.
 D.Y. Zhang, S. Xiong, Y.S. Shi, J. Zhu, Q.L. Hu, J. Liu, Y. Wang, Antifouling enhancement of polyimide membrane by grafting DEDA-PS zwitterions, Chemosphere 198 (2018) 30–39.
 Z. Xu, J. Liao, H. Tang, N. Li, Antifouling polysulfone ultrafiltration membranes with pendent sulfonamide groups, J. Membr. Sci. 548 (2018) 481–489.
 X. Zhao, N. Jia, L. Chen, L. Liu, C. Gao, Metal-polyphenol coordination networks: towards engineering of antifouling hybrid membranes via in situ assembly, J. Membr. Sci. 563 (2018) 435–446.
 H. Zhang, M. Chiao, Anti-fouling coatings of poly(dimethylsiloxane) devices for biological and biomedical applications, J. Med. Biol. Eng. 35 (2015) 143-14.
 D. Rana, T. Matsuura, Surface modifications for antifouling membranes, Chem. Rev. 110 (2010) 2448–2471.
 F. Gao, G. Zhang, Q. Zhang, X. Zhan, F. Chen, Improved antifouling properties of poly(ether sulfone) membrane by incorporating the amphiphilic comb copolymer with mixed poly(ethylene glycol) and poly(dimethylsiloxane) brushes, Ind. Eng. Chem. Res. 54 (2015) 8789–8800.
 Z. Zhou, S. Rajabzadeh, A.R. Shaikh, Y. Kakihana, W. Ma, H. Matsuyama, Effect of surface properties on antifouling performance of poly(vinyl chloride-co-poly(ethylene glycol)methyl ether methacrylate)/PVC blend membrane, J. Membr. Sci. 514 (2016) 537–546.
 G.V. Dizon, A. Venault, Direct in-situ modification of PVDF membranes with a zwitterionic copolymer to form bi-continuous and fouling resistant membranes, J. Membr. Sci. 550 (2018) 45–58.
 A. Venault, C.-H. Hsu, K. Ishihara, Y. Chang, Zwitterionic bi-continuous membranes from a phosphobetaine copolymer/poly(vinylidene fluoride) blend via VIPS for biofouling mitigation, J. Membr. Sci. 550 (2018) 377–388.
 T. Xiang, T. Lu, W.-F. Zhao, C.-S. Zhao, Ionic-strength responsive zwitterionic copolymer hydrogels with tunable swelling and adsorption behaviors, Langmuir 35 (2019) 1146–1155.
 J. Wu, W. Lin, Z. Wang, F. Chen, Y. Chang, Investigation of the hydration of nonfouling material poly(sulfobetaine methacrylate) by low-field nuclear magnetic resonance, Langmuir 28 (2012) 7436–7441.
 Y.-N. Chou, T.-C. Wen, Y. Chang, Zwitterionic surface grafting of epoxylated sulfobetaine copolymers for the development of stealth biomaterial interfaces, Acta Biomater. 40 (2016) 78–91.
 A. Venault, Y.H. Liu, J.R. Wu, H.S. Yang, Y. Chang, J.Y. Lai, P. Aimar, Low-biofouling membranes prepared by liquid induced phase separation of the PVDF/ polystyrene-b-poly (ethylene glycol) methacrylate blend, J. Membr. Sci. 450 (2014) 340–350.
 S.W. Hsiao, A. Venault, H.S. Yang, Y. Chang, Bacterial resistance of self-assembled surfaces using PPOm-b-PSBMAn zwitterionic copolymer – concomitant effects of surface topography and surface chemistry on attachment of live bacteria, Colloids Surf., B 118 (2014) 254–260.
 J.-F. Jhong, A. Venault, L. Liu, J. Zheng, S.-H. Chen, A. Higuchi, J. Huang, Y. Chang, Introducing mixed-charge copolymers as wound dressing biomaterials, ACS Appl. Mater. Interfaces 6 (2014) 9858–9870.
 A. Venault, C.-C. Ye, Y.-C. Lin, C.-W. Tsai, J.-F. Jhong, R.-C. Ruaan, A. Higuchi, A. Chinnathambi, H.-T. Ho, Y. Chang, Zwitterionic fibrous polypropylene assembled with amphiphatic carboxybetaine copolymers for hemocompatible blood filtration, Acta Biomater. 40 (2016) 130–141.
 A. Venault, K.M. Trinh, Y. Chang, A zwitterionic zP(4VP-r-ODA) copolymer for providing polypropylene membranes with improved hemocompatibility, J. Membr. Sci. 501 (2016) 68–78.
 L.P. Zhu, Y.Y. Xu, H.B. Dong, Z. Yi, B.K. Zhu, Amphiphilic PPESK-graft-P(PEGMA) copolymer for surface modification of PPESK membranes, Mater. Chem. Phys. 115 (2009) 223–228.
 J. Jin, W. Jiang, Q. Shi, J. Zhao, J. Yin, P. Stagnaro, Fabrication of PP-g-PEGMA-gheparin and its hemocompatibility: from protein adsorption to anticoagulant tendency, Appl. Surf. Sci. 258 (2012) 5841–5849.
 M.G. Santonicola, M. Memesa, A. Meszyńska, Y. Mab, G.J. Vancso, Surface-grafted zwitterionic polymers as platforms for functional supported phospholipid membranes, Soft Matter 8 (2012) 1556–1562.
 W. Zhao, Q. Ye, H. Hu, X. Wang, F. Zhou, Grafting zwitterionic polymer brushes via electrochemical surface-initiated atomic-transfer radical polymerization for antifouling applications, J. Mater. Chem. B 2 (2014) 5352–5357.
 Y. Chang, W.-Y. Chang, Y.-J. Shih, T.-C. Wei, G.-H. Hsiue, Zwitterionic sulfobetainegrafted poly(vinylidene fluoride) membrane with highly effective blood compatibility via atmospheric plasma-induced surface copolymerization, ACS Appl. Mater. Interfaces 3 (2011) 1228–1237.
 E.M. Anastasi, B. Matthews, H.M. Stratton, M. Katouli, Pathogenic Escherichia coli found in sewage treatment plants and environmental waters, Appl. Environ. Microbiol. 78 (2012) 5536–5541.
 R.P. Feliciano, J.J. Meudt, D. Shanmuganayagam, C.G. Krueger, J.D. Reed, Ratio of “A-type” to “B-type” proanthocyanidin interflavan bonds affects extra-intestinal pathogenic Escherichia coli invasion of gut epithelial cells, J. Agric. Food Chem. 62 (2014) 3919–3925.
 P.J. Westgate, C. Park, Evaluation of proteins and organic nitrogen in wastewater treatment effluents, Environ. Sci. Technol. 44 (2010) 5352–5357.
 K.E. Brummel, S. Butenas, K.G. Mann, An integrated study of fibrinogen during blood coagulation, J. Biol. Chem. 274 (1999) 22862–22870.
 S. Kattula, J.R. Byrnes, A.S. Wolberg, Fibrinogen and fibrin hemostasis and thrombosis, Arterioscler. Thromb. Vasc. Biol. 37 (2017) 13–21.
 S. Chen, L. Li, C. Zhao, J. Zheng, Surface hydration: principles and applications toward low-fouling/nonfouling biomaterials, Polymer 51 (2010) 5283–5293.
 X. Hou, X. Wang, Q. Zhu, J. Bao, C. Mao, L. Jiang, J. Shen, Preparation of polypropylene superhydrophobic surface and its blood compatibility, Colloids Surf., B 80 (2010) 247–250.
 R. Li, H. Wang, W. Wang, Y. Ye, Simultaneous radiation induced graft polymerization of N-Vinyl-2-pyrrolidone onto polypropylene non-woven fabric for improvement of blood compatibility, Radiat. Phys. Chem. 88 (2013) 65–69.
 C. Zhang, J. Jin, J. Zhao, W. Jiang, J. Yin, Functionalized polypropylene non-woven fabric membrane with bovine serum albumin and its hemocompatibility enhancement, Colloids Surf., B 102 (2013) 45–52.
 Y.W. Chen, A. Venault, J.-F. Jhong, H.-T. Ho, C.-C. Liu, R.-H. Lee, G.-H. Hsiue, Y. Chang, Developing blood leukocytes depletion membranes from the design of bioinert PEGylated hydrogel interfaces with surface charge control, J. Membr. Sci. 537 (2017) 209–219.
 G. Liumbruno, F. Bennardello, A. Lattanzio, P. Piccoli, G. Rossetti, Recommendations for the transfusion of red blood cells, Blood Transfus. 7 (2009) 49–64.
 H. Hui, K.A. Fuller, W.N. Erber, M.D. Linden, Imaging flow cytometry in the assessment of leukocyte platelet aggregates, Methods 112 (2017) 46–54.
 Lien et al. Journal of Membrane Science Volume 584, 15 August 2019, Pages 148-160